3.2V 314Ah Aluminum Shell LiFePO4 Prismatic Battery Cell

High power LiFePO4 battery GSP71173204 314Ah 3.2V long life LFP battery, suitable for containerized ESS, DIY LiFePO4 battery pack.

High power LiFePO4 battery GSP71173204 314Ah 3.2V long life LFP battery, suitable for containerized ESS, DIY LiFePO4 battery pack

Feature

1. Ultra-high security platform stability: no fire explosion

2 . Long cycle: thousands of cycles, low electricity cost

3. High energy efficiency: room temperature 25°C/0.5P, energy efficiency ≥95.0%

4.Excellent low temperature: -30°C discharge and -40°C storage

5 . High consistency: achieve high consistency of temperature, life, capacity, internal resistance, voltage, etc

Specifications


Parameter

Specification

Model

LP71173204

Voltage

3.2V

Rated Capacity

314Ah

Charger voltage

3.65V

Discharge voltage

2.0V

Discharge current

3500mA

Cycle life

 8000

Monthly self-discharge rate

≤3.0%

Weight

5600±300g

Dimension

173.9*207.2*71.7mm

Product certification

UN38.3 / UL1642MSDS/IEC60086-4


Product Display And Dimension

3.2v 314ah lifepo4 battery

High Safety Technology

Through acupuncture, thermal runaway, impact, injection, and other 20+ safety tests; At the same time, overcharge does not occur thermal runaway. And through UL/IEC/UN/MSDS/ROHS/GB, etc. And multiple stringent certifications

1/Ultra wetted impedance electrolyte technology  2/High-safety composite diaphragm technology  3/Nanoscale safety coating technology


Applications

O1CN01kjqySM1es9ykp8tnR_!!1003563926-0-cib (1)_副本.jpg



1. Communication energy storage

2 . Battery energy storage

3 . Household energy storage

4. New energy ship

5 . Construction truck

6 .New energy vehicle




Notice for Assembling Battery Pack

Shocks, high temperature, or contacts of sharp edge components should not be allowed in battery pack 

Cell connection

1) Direct soldering of wire leads or devices to the cell is strictly prohibited.

2) Lead tabs with pre-soldered wiring shall be spot welded to the cells. Direct soldering may cause damage of components, such as separator and insulator, by heat generation

Prevention of short circuit within a battery pack

Enough insulation layers between wiring and the cells shall be used to maintain extra safety protection. The battery pack shall

be structured with no short circuit within the battery pack, which may cause generation of smoke or firing. 

Prohibition of disassembly

1) Never disassemble the cells

The disassembling may generate internal short circuit in the cell, which may cause gassing, firing, explosion, or other

problems.

2) Electrolyte is harmful

LIP battery should not have liquid from electrolyte flowing, but in case the electrolyte come into contact with the skin, or eyes, physicians shall flush the electrolyte immediately with fresh water and medical advice is to be sought.