3.2V LF32 Prismatic 32Ah LiFePO4 Battery Cell For DIY LFP Battery Pack

New Product 3.2V 32Ah LF32 Prismatic Aluminum-clad LiFePO4 Lithium Ion Power Battery Cell For Energy Storage System, EV, DIY LiFePO4 Battery Pack

LF32 LiFePO4 Battery Cell Features

Ⅰ Intelligent factory design, high-performance consistency.

Ⅱ Square aluminum shell structure, high-precision explosion-proof valve, high safety performance.

Ⅲ Low internal resistance, high discharge rate, and stable discharge platform.

Ⅳ Long cycle life, capacity retention rate over 80% after ≥3500 cycles at 1C/1C.

Ⅴ Green environmental protection

Specifications  Parameters

Details

Electrical Performance Diagram

Rate discharge curve at 25℃

Discharge curves at different temperatures

Cycle curve（1.0C, 3.65V-2.5V）

Attentions

1、It is necessary to ensure that the voltage, current, and temperature of the cell are monitored and protected when the cell is charged and discharged.

2、Please keep the cell away from heat sources, fire source, strong acid, strong alkali and other corrosive environment.

3、Do not short connect or install the battery with incorrect polarity at any time.

4、Do not mix up with cells from different models or manufacturers.

5、Do not use external force to make the cell fall, impact, puncture, do not disassemble the cell or change the external structure.

6、Please keep the cell’s charge under 30% ~ 50%SOC, and avoid direct sunlight or high temperature and humidity environment when the battery is not used for a long time.

7、Please wear protective devices such as rubber gloves when operating the battery.

8、Please immediately stop using if there have leakage, smoking or damage with cell , and contact our company to deal with.