LP44147272-130Ah 3.2V Lithium iron Phosphate Power lifepo4 Battery Cell with M8 internal thread
Grade A Lishen 3.2V 130Ah lithium power LiFePO4 battery cell with M8 internal thread, maximum 6C fast charge, 12C high discharge rate, low internal resistance, long cycle life, no memory effect, perfect for electric vehicles, electric bikes, scooters, boats, submarines, golf carts, etc.
Item | Specification |
Cell Type | Lithium -ion power cell |
Cell Model | LP44147272 |
Nominal Capacity | 130Ah |
Nominal Voltage | 3.2V |
AC-impedance | ≤ 1.0mΩ |
Weight | 3425±100g |
Dimension | 147.05(L)*44.4(T)*272(H)mm |
Standard Charge Method | Constant Current and Constant Voltage (CC/CV) |
Standard Charge Current | 1C |
Charge Voltage | 3.65V |
Charge End Current | 6.5A |
Maximum Charge Current | 3C(Continuous), 6C (10s) |
Charging Voltage | 3.65V |
Standard Discharge | Constant Current (CC) |
Standard Discharge Current | 1CA |
Discharge End Voltage | 2.0V |
Maximum Discharge Current | 6C (Continuous)12C(30s) |
Cycle Life | Capacity≥80% Nominal Capacity @2000th cycles |
Max Operating Temperature Range | Charge: 0℃ ~ 45℃, Discharge: -20℃ ~ 60℃ |
Optimal Operating Temperature Range | Charge: 15℃ ~ 35℃ |
Discharge: 15℃ ~ 35℃ | |
Storage Temperature | 1 month -40℃~ 45℃ |
6 months: -20℃ ~ 35°C | |
Cells should be stored at 35%SOC or the voltage is between 3.275V and 3.305V |
electric vehicle, electric bikes, scooters, boats, submarines, golf carts, communications, energy storage, Intelligent network, etc.
· Avoid overheat in any circumstances.Don't modify or disassemble the battery. It will be dangerous, and may cause ignition, heating, leakage or explosion.
· Don't put cells in overheatcircumstancesor disposed in fire ‚don't put cells under the sunshine.
· Don't short-circuit positive(+) and negative(-) terminals. Keep away from metal or other conductive materials. Jumbling the batteries of direct contact with positive(+) and negative(-) terminals or other conductive materials may cause short-circuit and may even cause fire and explosion.
· Don't reverse the positive (+) and negative (-) terminals.
· Don't put cells in water or other conductive liquids or let cells absorb amoisture.
· Don't impact cells excessively.
· Don't solder the battery directly. Excessive heating may cause deformation of the battery components such as the gasket, which may lead to the battery swelling, leakage, explosion,or ignition.
· Don't use abnormal cell which has damages by shipping stress, drop, short or something else, and which gives off electrolyte odor.
· Don't contact cans directly or with other conductive materails during the using process.
· Don't twist the terminal post with the torque which is more than 15N • m.