How do assemble the lithium ion battery pack 48v?

The problem of how to self-assemble the lithium ion battery pack 48v is the biggest puzzle for many people who want to self-assemble but have no experience or expertise.

A successfully assembled lithium battery pack can also be called a lithium battery pack, but the real lithium battery pack requires more materials in addition to the lithium battery pack, and then it is assembled again. In the assembly of lithium battery pack, this step is already what most people do not understand but want to do, this time to do it?

Go to the Internet to search for questions, but there are many answers, let people are confused, and even more do not know what to do. For this problem, we have put together a set of detailed tutorials on how to assemble the lithium ion battery pack 48v, hoping to help you.

At the same time, we also provide lithium battery pack customization services including not limited to lithium ion battery pack 48v

Tutorial on assembling lithium ion battery pack 48v

1. Data calculation

Before assembling the lithium ion battery pack 48v, it is necessary to calculate the product size and load capacity required by the lithium battery pack, and then calculate the capacity of the lithium battery pack that needs to be assembled according to the capacity required by the product, and then select the lithium battery according to the calculation results.

2. Prepare materials

Choose a good quality and reliable lithium battery, it is best to buy a quality guaranteed lithium battery in a specialty store or manufacturer, rather than in a personal or other less reliable place to buy. After all, lithium battery assembly, if there is a problem in the assembly process, lithium batteries are likely to be dangerous.

In addition to the reliable quality of lithium batteries, there is also a need to have a sophisticated lithium battery balance protection board. In the current market, the quality of the protection board is uneven, and there are analog batteries, which are difficult to distinguish from the appearance. If you want to choose, it is better to choose digital circuit control.

The container that holds the lithium battery also needs to be prepared to prevent the lithium battery pack from changing when it is moved after it is arranged. The material for isolating the lithium battery string and for better fixing effect, every two lithium batteries are bonded together with an adhesive such as silicone rubber.

The material that holds the lithium battery together in series, the nickel sheet, also needs to be prepared. In addition to these main materials, other materials can also be prepared for use when assembling lithium battery packs.

3. The specific steps of assembly

The lithium battery is first placed in a regular manner, and then the material is used to fix each string of lithium batteries.

After fixing each string of lithium batteries, it is best to use insulating materials such as highland barley paper to separate each string of lithium batteries and place the lithium battery skin damage resulting in short circuits in the future.

After it is arranged and fixed, it is possible to use the nickel tape for the most important series step.

After the series step of the lithium battery is completed, only the subsequent processing is left to finish. Use tape to bundle the battery, the positive and negative poles should be covered with highland barley paper first, so as to avoid the subsequent operation error resulting in a short circuit.

The installation of the protection board also needs attention, to determine the position of the protection board, comb the line of the protection board, and separate the cross place of the line with tape to avoid the risk of a short circuit. After the line is combed, it also needs to be trimmed, and finally, the line tin is included, and the solder wire must be used well.

The behavior of assembling lithium ion battery pack 48v by itself, for those who do not know much about this aspect, it is not recommended to directly start without understanding anything or to understand more information related to it in order to better cope with accidents in the assembly process.