48V 100Ah 5KWH Wall Mount Lithium Battery For Home Battery Storage
This product is mainly combined with the inverter, photovoltaic (PV), and related accessories to build a residential energy storage system. The system is used to store the direct current (DC) generated by photovoltaic (PV) in the connected battery and convert the direct current (DC) generated by the connected battery into alternating current (AC) and provide it to the home grid.
(Note: The actual Residential ESS may also include electrical equipment such as distribution boxes and metering meters)
The product is a lithium-ion battery that can store electrical energy and outputs DC current. It only maintains an electrical connection with the inverter. The electrical energy generated by the PV is converted by the inverter DC to DC and stored in the connected it. When Powerporter is needed, its electrical energy is converted by the inverter DC to AC and transmitted to the home grid to provide power for household appliances.
Energy Capacity: 5kWh
DOD: 95%
Output: 3kW
Size and Weight: 745×460×165mm/49.5kg
IP Grade: IP31
Installation: Floor or Wall mounted
Warranty: 5years
Certification: UN38.3, IEC62619, CE
1. Solar charge the battery during the day.
2. Use your stored energy anytime to power your home
3 It can be used as a backup in the city during a power outage
1. Solar charge the battery during the day.
2. Use your stored energy anytime to power your home
3. It can be used as a backup in the city during power outages.
Item | Parameters |
Nominal Voltage | 51.2V |
Nominal Capacity | 100Ah |
Discharge Voltage | 45~54V |
Charge Voltage | 51.5V~54V |
Cont. Charge Current | 50A |
Max. Charge Current | 100A |
Cont. Discharge Current | 65A |
Cont. Discharge Current | 100A |
Cont. Discharge DC Power | 3000W |
Max. Discharge DC Power | 5000W/ More than 2 units in parallel |
Operating temperature | 0℃ ~ 45℃ (Charge) -20℃ ~ 45℃ (Discharge) |
Scalability | Up to 4 units |
DOD | 90% |
Communication | CAN2.0 / RS485 |
Cycle Life | >6000 |
IP Grade | IP31 |
Installation | Wall or Floor mount |
Dimension | 745×460×165mm |
Weight | 49.5kg |
Warranty | 5 Years |
Certification | UN38.3/IEC62619/CE |
1. Before connecting, please make sure that the open circuit voltage of the photovoltaic array is within the acceptable range of the inverter to which the product is adapted, otherwise, the product may be damaged.
2. Never use any solvents, abrasives, or corrosive substances to clean this product.
3. Do not store or place any objects on the product. It may cause serious defects or malfunctions.
4. Before connecting the product to the inverter terminal, make sure that the product is turned off, the inverter is turned off and the mains and PV channels are disconnected.
5. The wiring terminal of the product is only allowed to be connected to the adaptable inverter. Do not connect this product directly to the AC power supply or generator. Connecting the product to other external devices may cause serious damage to the device.
6. The product transportation process should be as stable as possible, to avoid the product in an environment of severe vibration.
7. The supply of products should be performed or supervised by personnel with battery knowledge and necessary precautions.